Huawei DRA-LX2 Firmware Flash File MT6739 8.10 Frp Unlock Dead Fix Customer Service File
Article with HTML formatting
Huawei DRA-LX2 Flash File MT6739 8.10 Frp Dead Fix Customer Care File
If you are a user of Huawei DRA-LX2 smartphone, you may have encountered some issues with your device such as bootloop, bricking, frp lock, etc. In such cases, you may need to flash a stock ROM or firmware file on your device to fix these problems and restore your device to its original state. In this article, we will show you how to download and install the latest Huawei DRA-LX2 flash file MT6739 8.10 frp dead fix customer care file on your device using different methods. We will also provide you with some useful information about Huawei DRA-LX2 specifications, features, frp bypass methods, customer care contacts, and service center locations.
Huawei DRA-LX2 Flash File MT6739 8.10 Frp Dead Fix Customer Care File
Download File: https://www.google.com/url?q=https%3A%2F%2Fmiimms.com%2F2ukQWz&sa=D&sntz=1&usg=AOvVaw3sRbpxKs7C1FDGXB4V9OzY
Introduction
Huawei DRA-LX2 is a budget-friendly smartphone that was launched in May 2018 as part of the Huawei Y5 Prime 2018 series. It has a 5.45-inch IPS LCD display with a resolution of 720 x 1440 pixels, a 13 MP rear camera with LED flash, a 5 MP front camera with LED flash, a MediaTek MT6739 quad-core processor with 1.5 GHz clock speed, a 2 GB RAM, a 16 GB internal storage, a microSD card slot, a 3020 mAh battery, and an Android 8.1 Oreo operating system with EMUI 8.0 user interface.
A flash file or firmware file is a software program that controls the hardware and software of a device. It is also known as the stock ROM or the official ROM. Flashing a stock ROM on your device can help you to fix various issues such as bootloop, bricking, frp lock, dead phone, etc. It can also help you to upgrade or downgrade your device's software version, improve its performance and battery life, remove unwanted apps and bloatware, etc.
However, flashing a stock ROM on your device also involves some risks and precautions. You may lose your data, warranty, or root access if you flash a stock ROM on your device. You may also damage your device if you flash a wrong or corrupted file, or if you interrupt the flashing process. Therefore, you should always backup your data before flashing a stock ROM on your device. You should also follow the instructions carefully and use the correct tools and files for flashing a stock ROM on your device.
Huawei DRA-LX2 specifications and features
Before we proceed to the flashing process, let us take a look at some of the specifications and features of Huawei DRA-LX2 smartphone. Here is a table that summarizes the main specifications and features of Huawei DRA-LX2 smartphone:
Specifications
Features
Display
5.45-inch IPS LCD capacitive touchscreen with 720 x 1440 pixels resolution, 18:9 aspect ratio, and 295 ppi density
Camera
13 MP rear camera with LED flash, autofocus, HDR, panorama, and 1080p video recording at 30 fps 5 MP front camera with LED flash and 1080p video recording at 30 fps
CPU
MediaTek MT6739 quad-core processor with 1.5 GHz clock speed and Cortex-A53 cores
GPU
PowerVR GE8100
RAM
2 GB
Storage
16 GB internal storage with microSD card slot (up to 256 GB)
Battery
Non-removable Li-Ion 3020 mAh battery with standard charging
OS
Android 8.1 Oreo with EMUI 8.0 user interface
SIM
Dual SIM (Nano-SIM, dual stand-by)
Network
GSM / HSPA / LTE with VoLTE support
Sensors
Accelerometer, proximity, compass
Connectivity
Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot Bluetooth 4.2, A2DP, LE GPS with A-GPS, GLONASS MicroUSB 2.0 3.5 mm audio jack FM radio Face unlock feature No fingerprint scanner No NFC support No fast charging support No wireless charging support No water or dust resistance rating No infrared port No gyroscope sensor No ambient light sensor No barometer sensor No temperature sensor No heart rate sensor No wireless display support No OTG support No HDMI support No DLNA support No MHL support No USB Type-C port No stereo speakers No noise cancellation feature No Dolby Atmos feature No HDR10 feature No wireless earbuds support No reverse charging feature
As you can see from the table above, Huawei DRA-LX2 is a decent smartphone for its price range. It has a good display, camera, battery, and performance. However, it also lacks some features that are common in other smartphones such as fingerprint scanner, NFC support, fast charging support, etc. Therefore, you may want to flash a custom ROM or root your device to get more features and customization options for your device.
Huawei DRA-LX2 firmware update and download links
If you want to flash a stock ROM on your Huawei DRA-LX2 device, you need to download the firmware file from a reliable source. You can check for firmware updates and download them from the official Huawei website or from some third-party websites that provide firmware files for various devices. Here are some links where you can download the latest Huawei DRA-LX2 flash file MT6739 8.10 frp dead fix customer care file:
Huawei DRA-LX2 Flash File MT6739 8.10 Frp Dead Fix Customer Care File from Huawei official website
Huawei DRA-LX2 Flash File MT6739 8.10 Frp Dead Fix Customer Care File from FirmwareFile.com
Huawei DRA-LX2 Flash File MT6739 8.10 Frp Dead Fix Customer Care File from NeedFlashFile.com
After downloading the firmware file, you need to extract it on your PC using a tool like WinRAR or 7-Zip. You will get a folder containing some files such as scatter file, preloader file, recovery file, etc. You will need these files for flashing the firmware on your device using different methods.
There are two main methods that you can use to flash the firmware on your Huawei DRA-LX2 device: using SP Flash Tool or using Huawei HiSuite. We will explain both methods in detail below.
How to use SP Flash Tool to flash the firmware
SP Flash Tool is a software application that allows you to flash stock ROMs, custom ROMs, recovery images, and other files on MediaTek devices. It is also known as MTK Flash Tool or Smart Phone Flash Tool. You can use SP Flash Tool to flash the firmware on your Huawei DRA-LX2 device by following these steps:
Download and install SP Flash Tool on your PC from here. You may also need to install some drivers for your device such as VCOM drivers or CDC drivers.
Run SP Flash Tool as administrator and click on the "Choose" button under the "Scatter-loading File" section. Browse and select the scatter file from the extracted firmware folder. The scatter file is usually named as MT6739_Android_scatter.txt or similar.
After loading the scatter file, you will see a list of partitions that will be flashed on your device. You can uncheck any partition that you don't want to flash, such as userdata or cache. However, it is recommended to flash all the partitions for a complete installation.
Click on the "Download" button at the top of SP Flash Tool. This will start the flashing process.
Turn off your Huawei DRA-LX2 device and remove the battery if possible. Then connect it to your PC using a USB cable while holding the volume down or volume up button. This will put your device in download mode or preloader mode.
Wait for SP Flash Tool to detect your device and start flashing the firmware on it. You will see a progress bar and a green tick mark when the flashing is done.
Disconnect your device from your PC and reboot it. You have successfully flashed the firmware on your Huawei DRA-LX2 device using SP Flash Tool.
Note: If you encounter any errors or issues while using SP Flash Tool, such as BROM error, DRAM error, S_FT_ENABLE_DRAM_FAIL error, etc., you can try to fix them by following some troubleshooting steps such as changing the USB port, using a different USB cable, reinstalling the drivers, formatting the device before flashing, etc.
How to use Huawei HiSuite to flash the firmware
Huawei HiSuite is a software application that allows you to manage and backup your Huawei devices on your PC. It also allows you to update and restore your Huawei devices using official firmware files. You can use Huawei HiSuite to flash the firmware on your Huawei DRA-LX2 device by following these steps:
Download and install Huawei HiSuite on your PC from here. You may also need to enable USB debugging mode and allow HiSuite access on your device.
Run Huawei HiSuite and connect your Huawei DRA-LX2 device to your PC using a USB cable. HiSuite will recognize your device and display its information.
Click on the "Update" button at the bottom of HiSuite. This will check for any available updates for your device.
If there is an update available, you will see a pop-up window with the update details and the option to download and install it. Click on the "Download and update" button to proceed.
If there is no update available, or if you want to flash a custom firmware file, you can click on the "Restore" button at the bottom of HiSuite. This will allow you to browse and select a firmware file from your PC. You can use the firmware file that you downloaded from the links above.
After selecting the firmware file, HiSuite will verify it and show you a confirmation window with the firmware details and the option to backup your data. You can choose to backup your data or skip this step. Then click on the "Restore" button to start flashing the firmware on your device.
Wait for HiSuite to flash the firmware on your device. You will see a progress bar and a message when the flashing is done.
Disconnect your device from your PC and reboot it. You have successfully flashed the firmware on your Huawei DRA-LX2 device using Huawei HiSuite.
Note: If you encounter any errors or issues while using Huawei HiSuite, such as connection error, verification error, restore error, etc., you can try to fix them by following some troubleshooting steps such as changing the USB port, using a different USB cable, reinstalling HiSuite, enabling USB debugging mode, allowing HiSuite access, etc.
Huawei DRA-LX2 frp bypass and unlock methods
FRP stands for Factory Reset Protection. It is a security feature that prevents unauthorized access to your device after a factory reset. It requires you to enter your Google account credentials that were previously synced with your device before you can use it again. However, sometimes you may forget your Google account credentials or buy a second-hand device that is frp locked. In such cases, you may need to bypass or unlock frp on your device using some methods.
There are two main methods that you can use to bypass or unlock frp on your Huawei DRA-LX2 device: using Phone Clone app or using SP Flash Tool. We will explain both methods in detail below.
How to use Phone Clone app to bypass frp without PC
Phone Clone app is an app that allows you to transfer data from one phone to another phone. You can use Phone Clone app to bypass frp on your Huawei DRA-LX2 device without using a PC by following these steps:
Download and install Phone Clone app on another phone that is not frp locked. You can download Phone Clone app from Google Play Store or Huawei AppGallery.
Turn on your Huawei DRA-LX2 device and connect it to a Wi-Fi network. Then go to the frp lock screen where it asks you to enter your Google account credentials.
Tap on the "Emergency Call" option and dial *#*#1357946#*#*. This will open the Settings menu on your device.
In the Settings menu, go to System > Reset > Reset phone > Reset phone. This will erase all data on your device and restart it.
After restarting, go through the initial setup process until you reach the "Data Import" screen. Tap on "This is the new phone" option and select "Other Android phone" as the old phone model.
On the other phone, open Phone Clone app and tap on "This is the old phone" option. Scan the QR code that is displayed on your Huawei DRA-LX2 device using the other phone's camera.
After scanning the QR code, both phones will be connected via Wi-Fi hotspot. Select any data that you want to transfer from the other phone to your Huawei DRA-LX2 device and tap on "Transfer" button.
Wait for Phone Clone app to transfer the data from the other phone to your Huawei DRA-LX2 device. After the transfer is completed, tap on "Done" button on both phones.
Your Huawei DRA-LX2 device will continue the initial setup process and skip the frp lock screen. You have successfully bypassed frp on your Huawei DRA-LX2 device using Phone Clone app without PC.
Note: This method may not work on some devices or Android versions. You may also need to enable USB debugging mode and OEM unlocking mode on your Huawei DRA-LX2 device before resetting it.
How to use SP Flash Tool to bypass frp with PC
You can also use SP Flash Tool to bypass frp on your Huawei DRA-LX2 device with PC by following these steps:
Download and install SP Flash Tool on your PC from here. You may also need to install some drivers for your device such as VCOM drivers or CDC drivers.
Download and extract the frp bypass file for Huawei DRA-LX2 device from here. You will get a folder containing a scatter file and a frp file.
Run SP Flash Tool as administrator and click on the "Choose" button under the "Scatter-loading File" section. Browse and select the scatter file from the extracted frp bypass folder. The scatter file is usually named as MT6739_Android_scatter.txt or similar.
After loading the scatter file, you will see a list of partitions that will be flashed on your device. Uncheck all the partitions except the one that has frp in its name. This is the partition that will remove the frp lock from your device.
Click on the "Download" button at the top of SP Flash Tool. This will start the flashing process.
Turn off your Huawei DRA-LX2 device and remove the battery if possible. Then connect it to your PC using a USB cable while holding the volume down or volume up button. This will put your device in download mode or preloader mode.
Wait for SP Flash Tool to detect your device and start flashing the frp bypass file on it. You will see a progress bar and a green tick mark when the flashing is done.
Disconnect your device from your PC and reboot it. You have successfully bypassed frp on your Huawei DRA-LX2 device using SP Flash Tool with PC.
Note: This method may not work on some devices or Android versions. You may also need to enable USB debugging mode and OEM unlocking mode on your Huawei DRA-LX2 device before flashing it.
Huawei DRA-LX2 customer care and service center information
If you have any questions, queries, or issues regarding your Huawei DRA-LX2 device, you can contact Huawei customer care for support and assistance. You can also visit Huawei service center near you for repair and warranty services. Here are some ways to contact Huawei customer care and find Huawei service center information:
You can call Huawei customer care toll-free number at 1800-209-6555 (India) or 1-888-548-2934 (USA) or visit Huawei support website for more contact details.
You can chat with Huawei customer care online by visiting Huawei live chat website or using Huawei HiCare app on your device.
You can email Huawei customer care at service.hw.in@huawei.com (India) or supportusa@huawei.com (USA) or visit Huawei email support website for more email addresses.
You can find Huawei service center near you by visiting Huawei service center locator website or using Huawei HiCare app on your device.
Huawei customer care and service center staff are friendly, professional, and helpful. They will try their best to solve your problems and provide you with satisfactory solutions.
Conclusion
In this article, we have shown you how to download and install the latest Huawei DRA-LX2 flash file MT6739 8.10 frp dead fix customer care file on your device using different methods. We have also provided you with some useful information about Huawei DRA-LX2 specifications, features, frp bypass methods, customer care contacts, and service center locations.
We hope that this article has helped you to fix your Huawei DRA-LX2 device issues and improve its performance and functionality. If you have any feedback or comments, please feel free to share them with us in the comment section below. We would love to hear from you!
FAQs
Here are some frequently asked questions and answers about Huawei DRA-LX2 flash file MT6739 8.10 frp dead fix customer care file:
Q1: How to backup data before flashing Huawei DRA-LX2?
A1: You can use Huawei Backup app, Phone Clone app, or Google Drive to backup your data before flashing Huawei DRA-LX2. Here are the steps to backup data using these apps:
Huawei Backup app: Download and install Huawei Backup app on your device from Google Play Store or Huawei AppGallery. Open the app and tap on "Backup" option. Select the data that you want to backup such as contacts, messages, photos, etc. Choose a backup location such as internal storage, SD card, or external storage. Tap on "Back up" button and wait for the backup process to complete.
Phone Clone app: Download and install Phone Clone app on your device and another device that is not frp locked. You can download Phone Clone app from Google Play Store or Huawei AppGallery. Open the app on both devices and tap on "This is the old phone" option on your Huawei DRA-LX2 device and "This is the new phone" option on the other device. Scan the QR code that is displayed on the other device using your Huawei DRA-LX2 device's camera. Select the data that you want to transfer from your Huawei DRA-LX2 device to the other device such as contacts, messages, photos, etc. Tap on "Transfer" button and wait for the transfer process to complete.
Google Drive: Download and install Google Drive app on your device from Google Play Store. Open the app and sign in with your Google account. Tap on the "+" button and select "Upload" option. Select the files that you want to backup such as contacts, messages, photos, etc. Tap on "Upload" button and wait for the upload process to complete.
Q2: How to fix bootloop or bricking issues after flashing Huawei DRA-LX2?
A2: You can try to fix bootloop or bricking issues after flashing Huawei DRA-LX2 by following these steps:
Wipe cache partition: Turn off your Huawei DRA-LX2 device and press and hold the power button and volume up button simultaneously until you see the Huawei logo. Release the buttons and you will enter the recovery mode. Use the volume buttons to navigate and the power button to select. Choose "Wipe cache partition" option and confirm. Wait for the process to complete and reboot your device.
Factory reset: Turn off your Huawei DRA-LX2 device and press and hold the power button and volume up button simultaneously until you see the Huawei logo. Release the buttons and you will enter the recovery mode. Use the volume buttons to navigate and the power button to select. Choose "Wipe data/factory reset" opti